When it comes to keeping things clean, some of us are just lazy and don’t want to go through all the extra hassle. And probably for that reason, a few home gadgets and appliances get totally ignored to get a thorough cleanup session.
For example, your daily used electric kettle. Such habits are enough reasons for causing some serious hygiene issues. And one of the most common issues is discovering a layer of scale inside electric kettle. Thankfully, you can use this simple ingredient from your kitchen pantry to get rid of this unwanted stuff. And that is a lemon!
Today we will be exploring a quick cleaning hack using this almost all-time available ingredient. And so, if you don’t know how to clean electric kettle with lemon, keep on reading.
Here’s the Complete Method on How to Clean Electric Kettle with Lemon.
You can try this method for regular as well as Electric Tea Kettle with Infuser for getting a good cleanup. However, it is best to check the instructions provided by kettle’s manufacturer. So that you can ensure lemon is safe for use. In most of the cases, there should be no problem with using lemon, but double-checking won’t harm. Also, you can use limes instead. But for the best possible results, lemon works better.
Give the Exterior a Basic Clean.
First of all, let’s deal with the kettle’s outside surface. Even if it does not look very bad, you should consider giving it some special cleaning treatment along with interior part. And to do so, simply make an easy solution.
You’ll need some warm clean water and any hard-chemical excluded dish soap for this. Using a soft sponge, wash and scrub the kettle’s external surface. Then rinse it like usual with clean water. Use a microfiber cloth to dry the outer surface nicely. It’ll be good if you avoid getting the soap water inside of your kettle. Also, try to clean it using this method at least once every 2 weeks for keeping the exterior dirt free.
Make the Lime Mixture.
Now for the main interior cleanup, you need to make a solution using lemon. For this get about one and a half cups of water and squeeze a lemon into it. After squeezing the lemon, don’t throw its skin in trash. Instead, you want to cut it into a few tiny pieces. Mix these pieces with water as well. If there’s no whole lemon available right now, you can also use lemon juice instead. In that case, you want to mix one portion of lemon juice with 3 portions of water.
Pour It in Kettle & Bring it to Boil.
Now once you are ready with the lemon water mixture, gradually pour it into kettle. You want to fill the kettle just halfway not entirely. Then plug the kettle to a power source. Let the mixture get heated up for a while after that. You want to bring it to the boiling point and let it stay like this for at least one minute.
Then turn the kettle off. Leave this solution inside for an hour after this. You want to unplug the kettle and keep it somewhere safe aside on a cool surface. If you cannot wait for an hour, then at least 30 minutes should be given. So, the solution inside your kettle can descale properly. And at the same time, it will cool down gradually.
Rinse the Kettle.
Once you have waited for an hour, discard the lemon solution out from your stainless electric kettle. Make sure the kettle is completely cool now. And then you want to take it under your kitchen sink and rinse properly.
Make sure you give it a thorough rinse so that all the remnants of lemon are out from it. For the best results, it’s good to go for at least 4 or 5 rinses. While rinsing, keeping the kettle lid detached will help. So, do it if possible and then wash under the sink faucet.
Wipe & Run Second Cycle.
You need to wipe the interior of kettle with a clean microfiber cloth. Make sure you give this step enough time so the interior is completely dry. And after that run the kettle on a plain water cycle.
If you figure out limescale still residing inside the kettle, then here’s what to do. Get a very tiny amount of baking soda on a clean damp sponge. Then use it for wiping down the entire interior surface of kettle. You need to fill it with water halfway once again.
And just like before bring the water to boiling by turning it on. Once it heats the water, turn off and pour out everything. You need to repeat this step continuously until there’s zero limescale noticeable inside the kettle. If there’s any lemony odor still residing inside your kettle, repeat a few more cycles of clean water and that should remove the scent.
Things to Keep in Mind.
If there’s limescale noticeable in the filter of kettle, then use one cup of vinegar for giving it a good 10 minutes soak. This will loosen up any limescale residing in it, even the stubborn ones. And then scrub and wash the filter. Dry it completely before putting back.
Kettles come with some heating elements that you should never scrub. This can cause damage to the special protective coating on it.
In the cleaning process, you should not keep water stored in kettle for too long. This can make it more prone to rust development.
Now you know how to clean electric kettle with lemon. It’s very crucial to keep all the damaging mineral deposits out of your kettle. This becomes even more necessary if you live in an area with hard water. Because the furring can really lead you to get a slow heating process gradually.
On top of that, you’ll find out gross limescale flakes floating inside your tea and coffee. So, giving your electric kettle a thorough clean is your only sure bet to keep these things aside from happening. Depending on how regularly you use the kettle, clean less or more frequently.